FlySto FlySto
Back

GRT Avionics

Overview

GRT avionics provides a USB Flight Data Logger (Black Box Feature). The data is saved within the EFIS and then periodically written to the USB drive according to user settings. To export data

How it works

  1. Go to SET MENU > General Setup > Demo Settings. Press the knob to open the page and bring up the following settings
  2. USB Flight Data Logger: (ON/OFF) When ON, the EFIS will record data when any of these are true: airspeed is valid (above the sensor minimum), ground speed is above 5 knots, RPM/N1 input is non-zero, fuel flow is non-zero.
  3. USB FDL Record Interval (ms): Data samples are recorded within the EFIS at this interval: 200-30000 ms in steps of 200 ms. Default is 1000 ms (1000 ms = 1 second). FlySto recommends 200ms for getting the most detailed analysis and replay.
  4. USB FDL Save Interval (s): The recorded data is written to the USB flash drive at this interval: 0-300 seconds. Default is 60 seconds (if set to zero, the file is only written when the internal buffer fills up or the data logger stops).

Notes

info
The data is saved as a .CSV (comma separated variable) file on the USB stick called "GRT FDL [Number].csv"
FlySto